*
Support FAQ    
Support Liebert Faq UPS Systems
LED Luminaries

 LED Lights/SolarPanels

Liebert UPS systems from 600VA TO 4800KVA
Surge Suppressors
Liebert Precision Air Conditioning Systems
Batteries, Inverters, Stabilizers SMF, Tubular, Inverter and 2 volt VRLA long life batteries
Introduction to Simi
   
ref
 

 

100% of Fortune 500 companies rely on Emerson Network Power, You can too...

Solar Inverters

Emerson Introduced Grid connected Solar Inverters  ( Liebert Energy Export Unit (EEU) , which be Synchronized to grid. It is now available  up to 100Kw as a single unit.  Solar bi-directional Inverters with battery back up is also available (Liebert Energy Storage Unit). DSP based MPPT design ensure most efficient use of the solar panels used along with it.  Liebert ESU is single / three phase output, bi-directional inverter system. ESU operates in parallel with the grid utility. Solar Photo voltaic panels convert solar energy into electrical energy as DC power. This DC power is used to charge the batteries through a charge controller and also used for the load through inverter.

Liebert EEU is single / three phase output inverter, with Grid interactive feature. Solar Photo voltaic panels converts solar energy into electrical energy as DC power. This DC power becomes input for the EEU inverter. The inverter converts it into conventional AC power, and with its state of the art Grid
synchronization design, this AC power is fed to the supply  grid.

LEDs are another option to save /generate Power, where power is already available.use of LEDs can help in utilizing  the power efficiently for lighting applications
 

Introduction to LED Luminaries

Power LEDs are the latest addition to the various type of Luminaries available for lighting purposes,

LEDs are having many unparalleled features and benefits over other luminaries available in the market. LEDs are solid state lights called Light Emitting diodes, which converts current in to light directly. In all other types of light sources , light is produced through some process.  With  Incandescent lamps current is used to heat the filament ( as a space heater) to a great temperature and light emits (as a byproduct) when the temperature goes very high. In Tube lights and CFL lights  light is produced when the electrons falls on some special materials coated on the surface of the tube. But in LEDs light is produced directly from Electric current.

                        Since lights are one of the biggest power users  we must  pay close attention to what kind of luminary we  use. If all the lights are replaced with efficient versions, lot of power will be saved and it will solve the scarcity of power to a greater extend.

                        Use of LEDs for lighting purposes  makes the use of Photo Voltaic Panels  a viable proposal  as the size of PV panels and Batteries can be small for same a system of same capacity.

  LEDS are having the following features and advantages

  1. LEDs Luminaries are highly efficient light sources. LEDs consumes atleast 50% less power compared to existing luminaries.  Power Saved is the Double the power generated. And that is the foremost reason why we must use LED luminaries. When we use LEDs we produce power and give to Electricity board free of cost .
  2. Very High Efficiency .Power saving which can be achieved by using LED Lightings is about 40% to 80%, depending on the applications
  3. LED can be used for selective lighting,  only the required area will be lit, which in-turn increases the efficiency at  the same time improve the ambiance
  4. LEDs are  best suitable for Theam lightings where we can control brightens, direction and colors as per the situation/ requirements
  5. Life of LED are very high in comparison with other luminaries and it goes above 50000 hours.
  6. LEDs are best suitable where back up is required for lighting. The size of Inverter and Battery can be Halved  and the re coring cost on batteries can be saved if we convert all the important and  continuously required  luminaries  in to LEDs
  7. LEDs work on DC power  and hence LEDs can be put on batteries directly with out any inverter increasing efficiency  flexibility in the usage  of power.
  8. Maximum saving is possible , if we replace all the Luminaries which work all the  24 hours. The more we use , the more we  save. Best suitable for Flood Lights, Street Lights, Factory  shop floor lightings. Factories, Hospitals, Bus stations/ Railway stations, Aerodrams  etc are the  places where 24hr lighting is required.
  9. LED contains no toxic elements , disposal is easy . Unlike other type of luminaries , which contains mercury  and pollute the environment.
  10. Use LEDs , Save power and  can help to reduce the global warming

We can give LED lighting for the following categories. A wide range of innovative LED lighting for a variety of applications, including indoor, outdoor and handheld lighting.

Contact Mr.Mathew George Thoduka
Ph.0712,2467551, 2428319, 2438907, Fax: 0712 6612030, 6614636
e mail:
simi_ngp@simielectronics.com;simisweta@satyam.net.in
 

 

 

 

Commercial Lighting